News
Major celebration to mark opening of new factory in Oud Gastel
15-06-2023 - We announced our second location in the Netherlands one year ago. 352 days later, the location in Oud Gastel was opened with a party. Here is a summary!
Update tubes drawings in Sophia®
09-06-2023 - Recently there has been an update in Sophia which affects drawings containing tubes. Find out what this change means for you.
Expansion of edge finishing options
22-02-2023 - 247TailorSteel is now expanding this Sophia® service by offering edge breaking on both sides. It will be possible to find all these services on our website and other channels under the common term ‘edge finishing’.
247TailorSteel celebrates grand site inauguration in Langenau
23-11-2022 - On November 23, the time had finally come. After months of preparations, the official opening ceremony of our production facility in Langenau could finally take place. Around 160 guests, including the mayor of Langenau, Daniel Salemi, and the Honorary Consul of the Kingdom of the Netherlands, Albrecht Kruse, celebrated this special day in the festively decorated production hall.
Second production location for 247TailorSteel in the Netherlands
27-06-2022 - We recently announced the construction of our first factory in Belgium. And 247TailorSteel continues to grow! We are expanding further in the Netherlands and will be opening a second production location in Oud Gastel, near Roosendaal.
247TailorSteel builds new factory in Belgium
13-06-2022 - 247TailorSteel is expanding its activities in Belgium. It has been less than a year since 247TailorSteel announced the construction of its fourth factory. This factory will be fully operational in September 2022. Today, we are pleased to announce the construction of the first production facility in Belgium, fifth in total.
William Goossens joins 247TailorSteel as the company's new Chief Financial Officer (CFO)
24-05-2022 - William Goossens has been appointed as the new CFO of 247TailorSteel, effective from 1 June 2022. We are convinced that William, with all his knowledge and experience, will make a substantial contribution to the international growth of our organisation in the coming years.
Update: Construction of new production facility in Langenau (Germany)
28-03-2022 - In September last year the symbolic groundbreaking ceremony took place in Langenau, between Stuttgart en Munich and we started the construction of our next production facility. This will be the third factory in Germany. This will bring the total number of 247TailorSteel plants to four.
Availability around the Christmas holidays
15-12-2021 - Due to the holidays, our material suppliers will not deliver new stock from Tuesday 21st December 2021 to Monday 3rd January 2022. In order to prevent a shortage of materials, we have purchased additional stock on the fast moving materials.
Construction of new 247TailorSteel production facility in Germany has started
23-09-2021 - On 23 September, construction started on our new production facility in Langenau, located between Stuttgart and Munich.
New from 247TailorSteel: Magnelis®
03-08-2021 - This month, we have added a new material to our range: Magnelis®. This galvanised steel with a metallic coating is up to 10x more corrosion resistant than other galvanised steel types. Magnelis® also has self-recovering properties and is suitable for acidic and salty environments. Let us explain more about this unique material.
247TailorSteel builds third factory in Germany
21-04-2021 - 247TailorSteel is expanding its activities in Germany further. Today, we are pleased to announce the construction of a third production facility in Germany. The new production facility will be built in Langenau (in southern Germany, between Stuttgart and Munich).
Longer delivery times may occur starting in week 48
18-11-2020 - Parcel delivery services expects a peak in workload from week 48 until Christmas due to an increase in online sales. This may result in longer delivery times. 247TailorSteel also uses external delivery services for smaller orders. Therefore it may occur that the small orders takes longer to be delivered than you are used to.
Production at the new factory in Hilden has started
14-09-2020 - The day has finally arrived! After months of hard work, the production at our new factory in Hilden (DE) has started! Over the past few weeks, the lasers and bending machines have been installed, the offices painted and during the next few days, the finishing touches will be made. The new employees have been trained and are ready to start the 24/7 laser cutting and bending for our customers.
Improved manufacturing ability bending check
22-06-2020 - Within our Sophia® portal, we are introducing an advanced manufacturing ability check. This check makes it possible for you to see directly the points of improvements that need to be changed. By introducing this check we hope that the most order changes will belong to the past.
CorTen A in 2&3mm is available again in Sophia
15-06-2020 - CorTen A in 2&3mm is available again in Sophia.
Expansion: rounding of edges by Timesavers
15-11-2019 - In our machine park, we welcome the Rolls Royce of deburring machines: Timesavers. An ideal addition to our existing deburring machines.
Now also laser cutting of aluminium tubes
25-10-2019 - From 1 October, our Adige tube lasers will also laser cut aluminium tubes – a logical expansion that goes one step further towards making 247TailorSteel your one-stop-shop.
247TailorSteel again in the Top 250 growing companies
19-04-2019 - For the third consecutive year, the Top 250 growing companies in the Netherlands were presented and for the third time, we find ourselves on this distinguished list.
Opening of new location in Oyten (DE)
01-10-2018 - The new German office of 247TailorSteel was officially opened to great interest on Thursday, September 20, 2018. In Oyten, nearby Bremen, 247TailorSteel has realized a production hall of 6,000 m2, a warehouse of 1000 m2, and an office complex with two floors.
Important website updates
10-08-2018 - We've updated our website with new features and (video) content. For example, we now offer more information about our machinery and machining techniques. Our own people will give you a glimpse of what it's like to work at 247TailorSteel, in our completely revamped 'Join us'-section.
Specialized bending work in small or large quantities
12-07-2018 - Did you know that 247TailorSteel has 12 ATC bending machines and 2 PPEB bending machines in total at Varsseveld and Oyten? Here is a list of the advantages that these bending machines have to offer.
New TRUMPF 8kw fiber laser
29-06-2018 - After years of loyal service, one of our lasers is being replaced.
Second place at the Worldwide Sitefinity Website of the Year Awards
01-06-2018 - In the category of Manufacturing, our website came in second in the international Sitefinity Website of the Year Awards.
We are expanding!
17-05-2018 - Carel van Sorgen has signed the paperwork for a new construction site. This 4,500 m² property is right next to our location in Varsseveld. We will start building the new hall this year.
Join our team, come work at 247TailorSteel
12-04-2018 - We are growing fast! Therefore, we are constantly looking for new additions. It doesn’t matter whether you are young or old, male or female, at the beginning of your career or whether you have changed career paths after having done something completely different for years.
247TailorSteel GmbH moves to new location in Oyten
06-04-2018 - 247TailorSteel Bremen officially moved to their new location in Oyten, with extra laser cutters and bending machines for a more efficient production line.
247TailorSteel made the Top 250 Growth Companies
05-04-2018 - We are proud to announce that 247TailorSteel made the Top 250 Growth Companies! This list is compiled by the Erasmus Center for Entrepreneurship in cooperation with nlgroeit. We are proud of this achievement and we would like to tell you more about this honorable acknowledgement!
Update on construction Oyten
22-03-2018 - Steady progress is being made on our new location in Oyten. While we’re working on that, production work is already under way.
Press brake or swing beam bending?
19-01-2017 - There are a variety of machining methods that can be used to bend metal sheets. At 247TailorSteel, high-quality press brake machines are the preferred choice selected over a range of options available for metalworking.